Task File Examples

Below there are examples of finished programs, each consists of a single task file. To run the sample on the EM-486 it is necessary:

1. Create a text file (with the extension “.txt”) and program text
2. Place the file in the folder “TASKS”
3. Put the prepared folder on the memory microSD card, formatted in FAT or FAT32
4. Put the memory card in the EM-486

Available Examples

• Relay Control Based on OM-310 Fault - Turn on relay when OM-310 reports a fault
• Hysteresis Control for TR-101 - Control TR-101 hysteresis based on EM-486 temperature sensor
• Temperature Alarm with SMS - Send SMS and log temperature when threshold exceeded
• Simple Timer-Based Relay Control - Switch relay on/off at specified times of day
• Simple Temperature Control - Control relay based on temperature thresholds
• Astronomical Timer / Light Sensor - Street lighting control based on sunrise/sunset or light sensor